The Arduino Stack Exchange site just closed. What questions were migrated here before it shut down?
\$\begingroup\$
\$\endgroup\$
3
-
\$\begingroup\$ Why these questions don't have [migrated] in the title? \$\endgroup\$– Nick AlexeevApr 25, 2013 at 23:36
-
\$\begingroup\$ Questions migrated in don't get the title change. Also, there's no migration history for these because the source is now inaccessible. \$\endgroup\$– Shog9Apr 25, 2013 at 23:46
-
1\$\begingroup\$ I've always thought we should use [emigrated] and [immigrated] to ease that confusion. \$\endgroup\$– hairboatApr 29, 2013 at 17:18
Add a comment
|
1 Answer
\$\begingroup\$
\$\endgroup\$
2
The following 81 questions were migrated from Arduino.SE to EE.SE:
- How can I use my SMD Arduino to program a separate DIP ATmega328?
- How do I extend the number of analog (input) pins available to me?
- How can I create a serial bridge using two Bluetooth dongles?
- Is an Arduino capable of running 24/7?
- Building a menu and scheduler for a thermostat (rotary encoder for input, LCD screen)
- Check the quality of not original Arduino boards?
- Can I develop with the Arduino using an IDE with more features?
- How to water-protect my Arduino?
- How can I safely connect both Arduino and a 120V 10A circuit?
- What are the advantages of having USB part of the microcontroller (as the Leonardo does)?
- Does the Arduino have any specific cooling requirements?
- Is there anything I should watch out for with cheap "Arduino" copies?
- Is there any difference between pin 13 and the rest of the pins?
- How much current can I draw from the Arduino's pins?
- Can I output a HDMI signal with an Arduino?
- Does Arduino use step down voltage regulators?
- Can Arduino be used in commercial products?
- How can I distinguish between a clone and a real Arduino?
- Maximum Current Draw on Vin Pin
- Is it possible to program an Arduino in other languages?
- Can I use a serial module with a barebones Arduino?
- Can I write a bootloader to Atmega using serial port
- How can I use 5V devices and sensors with a Fio?
- How do I upload a hex file firmware to a target board without using the arduino IDE?
- Would Arduino be an appropriate platform to teach high school students?
- How to discover memory overflow errors in the Arduino C code?
- Does the Arduino Uno “Clean” the power input from the adapter?
- How do I create a permanent application from something prototyped with Arduino?
- Is there any way that the Arduino board can get damaged by using a buzzer without a resistor?
- What are methods to mitigate or reduce brown out resets?
- Can Arduino operate under water?
- Can I use the analog pins on the Arduino for my project as digital?
- How to connect RFduino to internet?
- Which board is the best fit for my project?
- Is there any way to simulate a program run before burning it onto the board?
- What are the implications of using PROGMEM?
- Pin 13: Do I need a Resistor?
- How do I use the flash memory on the Copperhead WiFi Shield?
- How should one switch from using an Arduino as a programmer to an external programmer?
- Working with a sensor and a motor, can I use both or should I use a motor shield?
- How do I transition from using the Arduino IDE to plain avrdude/make?
- How should I power my permanentified project?
- Unlabeled Headers/Pins on Arduino Uno
- I burnt a pin. Now, what do I do?
- Can I connect two different 1-Wire Devices to the same data pin on an Arduino?
- Problem stacking accelerometer and SD card shields on Arduino UNO
- Capacitors on Arduino Due
- How to make an Arduino play a sound
- Interfacing a 16x2 Character LCD to the Arduino
- How do I use a USB OTG cable to read a USB thumbdrive on Arduino Uno?
- Hologram project
- Why do some pins have `~` signs next to their numbers?
- Is it possible to remap the PWM output to other pins?
- How do I interface an XBee wireless module with the Uno?
- Efficient way to get multiple analogue voltages out of an Arduino?
- Can I use a USB keyboard with the PS2Keyboard library?
- What are the most common ways to fry an arduino?
- Are there different Ethernet shields available?
- What's the difference between INPUT and INPUT_PULLUP?
- Ethernet.begin() only works with SD Card removed - why?
- Which version is my Ethernet Shield?
- Is it possible to use a non-Leonardo board to act as a keyboard or other device?
- How can I control things without using delay?
- How should I light up all the LEDs?
- How can I control more than 64 LEDs using a Uno?
- Simulate a bouncing ball on a LED cube
- How can I mount a shield on a breadboard?
- analogRead(0) or analogRead(A0)
- Input impedance of Arduino Uno analog pins?
- Ensure serial has been written before executing next line
- Can the Arduino Leonardo act as a keyboard, mouse, and serial port at the same time?
- How to avoid SD Card and W1500 SPI mixup on the Ethernet Shield?
- What library version is bundled with which version of the Arduino IDE?
- What are these spots on the PCB that are by the mounting holes?
- Reduce the size of the Arduino bootloader?
- Tell if interrupts are enabled
- How do you update the Arduino IDE?
- Are there any disadvantages to look out for when using Optiboot?
- Are there any DIP alternatives to the FT232R?
- https://electronics.stackexchange.com/questions/67204/how-can-i-get-my-arduino-duemilanove-to-work-with-windows-7
- Can I reprogram my Arduino via a wifi shield?
In addition, the following questions were migrated from Arduino.SE to other sites on the network:
- https://raspberrypi.stackexchange.com/questions/7183/what-should-i-take-into-account-when-trying-to-decide-between-an-arduino-uno-or
- https://stackoverflow.com/questions/16224732/how-to-use-delays-in-arduino-code
- https://stackoverflow.com/questions/16224740/what-is-the-benefit-of-arduino-ethernets-library-ipaddress
- https://robotics.stackexchange.com/questions/1229/limits-of-pwm-timers-and-interrupts
- https://stackoverflow.com/questions/16224746/how-to-use-c11-to-program-the-arduino
- https://softwareengineering.stackexchange.com/questions/196151/what-guidelines-should-i-follow-while-designing-a-library
- https://stackoverflow.com/questions/16224789/does-using-more-voids-take-up-more-space-and-take-more-system-resources
- https://robotics.stackexchange.com/questions/1232/how-can-i-use-the-arduino-pid-library-to-drive-a-robot-in-a-straight-line
- https://stackoverflow.com/questions/16224801/how-can-i-port-an-arduino-program-to-net-for-use-on-a-netduino
- https://stackoverflow.com/questions/16224816/preventing-reset-on-serial-monitor-connect
-
10\$\begingroup\$ Thanks Shog9! We appreciate it. Welcome to the site, google bait. \$\endgroup\$– KortukApr 25, 2013 at 22:59
-
1\$\begingroup\$ Many of these don't belong here and shouldn't have been migrated. You should have left these questions where they were. Just because the arduino people don't now have a home on SE doesn't mean their stuff should be dumped here. Now we have a bunch of questions to close. \$\endgroup\$ Apr 26, 2013 at 13:07